H11 HEADLAMP BULB SERVICE KIT

How To Use

1. Remove the rear cover from the light housing by unscrewing the screws and sliding the rear cover off the housing. 2. Unplug the wire connector from the back of the halogen light source. 3. Using the finger tabs or the base of the light source, turn counterclockwise and remove the light source from the housing. Set it aside for proper disposal after installation is complete. 4. Verify the replacement light source is the correct voltage, wattage, and style (H9, H11, or H13). 5. Without touching the bulb, pick up a replacement halogen light source by the base, insert into the light housing making sure the keys are aligned with the slots as shown below, and turn the light source clockwise until tight. 6. Reconnect the wire connector to the back of the light source. 7. Replace the rear cover using the screws previously removed in Step 1.